Everyone knows that when we need to buy a laser engraving machine, we mainly look at the performance of this laser engraving machine, so what determines the performance of the laser engraving machine? The performance of the laser engraving machine is mainly determined by the engraving speed, engraving intensity, and spot size of the laser engraving machine.
The laser engraving machine can improve the engraving efficiency, make the surface of the engraved place smooth and round, quickly reduce the temperature of the non-metallic material being engraved, reduce the deformation and internal stress of the engraved object; it can be divided into CO2 Metal laser engraving machine and optical fiber metal engraving machine. Co2 non-metal laser engraving machines generally use glass laser tubes in China, and some high-end laser engraving machines use co2 metal radio frequency tubes.
Engraving speed refers to the speed of laser head of laser engraving machine, usually expressed by IPS (inches per second). High speed brings high production efficiency. Speed is also used to control the depth of the cut. For a specific laser intensity, the slower the speed, the greater the depth of the cut or engraving. You can use the engraving machine panel to adjust the speed, or you can use the computer's print driver to adjust. In the range of 1% to 100%, the adjustment is 1%. Hummer's advanced motion control system allows you to still get super fine engraving quality when engraving at high speed.
The engraving intensity refers to the intensity of the laser light from the laser engraving machine on the surface of the material. For a specific engraving speed, the greater the intensity, the greater the depth of the cut or engraving. You can use the engraving machine panel to adjust the intensity, or you can use the computer's print driver to adjust. In the range of 1% to 100%, the adjustment is 1%. The greater the intensity, the greater the speed. The depth of the cut is also deeper.
The engraving intensity refers to the intensity of the laser light from the laser engraving machine on the surface of the material. For a specific engraving speed, the greater the intensity, the greater the depth of the cut or engraving. You can use the engraving machine panel to adjust the intensity, or you can use the computer's print driver to adjust. In the range of 1% to 100%, the adjustment is 1%. The greater the intensity, the greater the speed. The depth of the cut is also deeper.
The chirped beam spot size can be adjusted with different focal length lenses. A small spot lens is used for high-resolution engraving, and a large spot lens is used for lower resolution engraving, but for vector cutting, it is the best choice. The new equipment comes standard with a 2.0-inch lens. Its spot size is in the middle, which is suitable for various occasions.
General laser engraving machine can engrav the following materials: wood products, plexiglass, glass, stone, crystal, Corian, paper, two-color board, leather, resin, acrylic, home textiles and other non-metal materials.
