Everyone knows that laser engraving machines are relatively common processing equipment in the advertising industry at present. The efficiency for processing identification signs is very obvious. The optical path system configuration required by different models of laser engraving machines is different. The optical path system of laser engraving machines includes laser heads. , Laser tube, reflector, focusing lens, etc., among which the laser head is divided into single-head, double-head, four-head laser head, and the laser tube will be engraved and cut according to the laser engraving machine to match the power of the laser tube, then the laser What role does the optical path system of the engraving machine play in the entire laser engraving machine? The following will briefly introduce the function and maintenance knowledge of the optical path system of the laser engraving machine for everyone.
The laser head is divided into single-head, double-head and four-head laser heads. Take a flower as an example. The product carved by a single-head laser head has only one flower, and the double-head laser head has 2 This flower greatly improves the work efficiency and saves time and cost; the laser tube will be configured with laser tubes of different powers according to the materials to be engraved and cut. The laser tube power is divided into 60w / 80w / 100w / 120w and so on.
Reflectors will pollute the smoke and dust during processing, and the reflectivity will be reduced, which is not conducive to future laser processing. Therefore, we must ensure the cleanliness of the mirror, and regularly inspect the mirror. If it is contaminated, we can clean the lens with absolute ethanol, and then wipe the mirror surface with absorbent cotton; the lens in the focusing lens must be protected because it is polluted. It will affect the output of the laser. If it is accidentally polluted, you can first remove the air blowing tube and protective sleeve, remove the lens, and then use a blower to blow away the dust on the surface of the focusing lens, and then wipe the lens surface with absorbent cotton dipped in absolute ethanol.
